The Power Pro II BX,
based on the Intel 82440BX chipset with a Socket
Slot 1, can handle Intel Pentium II® processors
with speeds of up to 450MHz, with a Front
Side Bus of 100MHz. Up to 1Gb of SDRAM
are supported via four 168-pin DIMM sockets,
while L2 cache is inside the processor. The board
has one 133MHz (2x mode) AGP slot, five PCI slots
and two ISA slots. It supports one floppy port,
one parallel port, two serial UART 16550 ports,
two USB ports and one IrDA infra red port. The
on-board EIDE interface provides connection for
UDMA hard drives and CD-ROMs, and the AMIBIOS
BIOS is fully ISA Plug & Play and DMI power
management compliant. A very useful function is
the ability to turn the computer on by remote
dial-in via a modem. CPU voltage range supported:
1.8 ~ 3.5V
| |
 |
| YEAR 2000
COMPLIANT |
|
| |
- BIOS: AMI,
ISA PnP, DMI 2.0
compliant, FLASH EPROM
|
- Compliant
with EMC directive (CE).
|
|
|
|
|
|
|
|
| FEATURES |
| |
- Processors:
Slot 1 for Pentium II up
to 450MHz
|
- Chipset:
Intel 82440BX PCIset
|
- DRAM
Modules: Four 168-pins
DIMMs
Memory Capacity: 1 Gb
SDRAM; ECC/Parity
checking
|
- Onboard IDE
2 Channels of bus master
IDE for up to four
devices
Up to PIO Mode 4 for
16.7MB/Sec.
Up to DMA Mode 2 for
22MB/Sec.
Ultra DMA/33 Mb/s
|
- Expansion's
slots:
One AGP slot
Five PCI slots
Two ISA slots
|
- Super I/O
on-board:
One floppy controller up
to 2.88Mb
Two 16550 UART compatible
serial ports
One ECP/EPP parallel port
Two USB headers
IrDA Interface infrared
header
Keyboard Interface 5-pin
DIN AT
PS/2 Mouse Interface
|
- Modem
ring-on
Windows 95 shut-off
Hardware monitoring
|
|
|
